Hinkley-lighting BIJOU FR43531PNI Manuel d'utilisateur télécharger pdf

FR43531

BIJOU

ASSEMBLY INSTRUCTIONS

Assembly of this ﬁxture will be accomplished by ﬁrst attaching the mounting hardware

to the junctin box, making all necessary electrical connections, mounting the ﬁxture to

the ceiling and then installing the glass.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 1

1 Prepare mounting strap (a) by threading the two long mounting screws (b)

into the back of the mounting strap (a), making sure the holes into which the

screws are threaded match the spacing of holes (d) in the backplate (e) - See

Drawing 1.

2 Attach mounting strap (a) to junction box (j) using two screws (c).

3 Make electrical connections from supply wire to ﬁxture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this ﬁxture.

4 To mount ﬁxture, slip the two mounting screws (b) through the two mounting

holes (d) in the canopy (e).

5 While holding ﬁxture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

[DRAWING 1]

Bulbs: 40 w cand.

01.01.13

1 2 3

FR43531BIJOU ASSEMBLY INSTRUCTIONS Assembly of this ﬁxture will be accomplished by ﬁrst attaching the mounting hardware to the junctin box, maki

FR43531PNI CRYSTAL REPLACEMENT ID PART NO.S

Page 3

FRIS18 TIERRA CABLEADO INSTRUCCIONES Advertencia De Seguridad: Lea las Instrucciones de cableado y conexión a tierra [FRIS 18], e instrucciones

Pas de commentaire

Hinkley-lighting BIJOU FR43531PNI Manuel d'utilisateur