Hinkley-lighting ENVY 5912 Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Envy Item No. 5912

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

mounting the ﬁxture to the wall and then installing the ﬁxture glass.

start here

5912

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

Drawing 1 - Fixture Mounting

Drawing 2 - Glass Installation

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

6.1.11

1. Prepare mounting strap (A) by threading 1” nipple (C) into the center hole of the

mounting strap (A), approximately 1/4“ - see Drawing 1.

2. Attach mounting strap (A) to junction box (J) using two screws (B) provided.

1. To mount ﬁxture, slip center hole of backplate (E) over nipple (C) and hold ﬁxture in

position - see Drawing 1.

2. Thread decorative knob (D) onto end of nipple (C) and tighten to secure ﬁxture.

1. To install glass ﬁrst remove socket ring (3) and spacer (4) from socket (1). -See

Drawing 2.

2. Slip hole in glass (2) over socket.

3. Slip spacer (4) onto socket and then thread socket ring (3) back onto socket and

tighten to secure glass. Repeat steps 1-3 for remaining pieces of glass.

4. Fixture can now be lamped accordingly.

5. After lamping thread bulb shield (5) onto socket.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

assembly instructionsFamily: Envy Item No. 59121. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Pas de commentaire

Hinkley-lighting ENVY 5912 Manuel d'utilisateur