Hinkley-lighting HAMPTON 3201AN Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Hampton Item No. 3201 AN/BR

1. Find a clear area in which you can work.

1. Attach acrylic lens assembly (1) by threading coupler (2) onto end of lower upright

stems (3) - see Drawings 1 and 2.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body structure, installing the mounting hardware to the junction box,

mounting the ﬁxture to the ceiling and then installing the shade.

start here

3201

8.31.09

Drawing 1 - Fixtu

Drawing 2 - Fixture Assembly

Drawing 3 - Mounting Instructions

re Assembly

1. Fasten mounting strap (B) to outlet box (A) with the original outlet box screws (C) -

see Drawing 3.

2. Thread nipple (D) into mounting strap (B) approximately 3/8” .

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this page to continue installation of this ﬁxture.

1. Slip canopy (E) over nipple (D) and up against ceiling - see Drawing 3.

2. Thread decorative ﬁnial (F) onto end of nipple (D).

1. Fixture can now be lamped accordingly.

2. Slip shade (4) onto acrylic assembly (1) - see Drawing 2.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

assembly instructionsFamily: Hampton Item No. 3201 AN/BR 1. Find a clear area in which you can work.1. Attach acrylic lens assembly (1) by thread

Modèles reliés HAMPTON 3201BR

Pas de commentaire