Hinkley-lighting MARCELLINA 4403GR Manuel d'utilisateur télécharger pdf



assembly instructions

Family: Marcellina Item No. 4403 GR

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst determining

whether it is to be ceiling mounted or chain hung, assembling the main body of

the ﬁxture, making all necessary electrical connections, mounting the main body in

the style you selected, and then installing the crystals.

start here

4403

Note: Maximum wattage for 4403 ﬁxture is 40 watts per bulb.

1. To assemble ﬁxture, if hanging ﬁxture - slip loop (1) along wire and thread onto

threaded tube (2) at top of ﬁxture - see Drawing 2.

2. Rotate arms (3) until they are equally spaced 120 degrees apart - see Drawing 1.

3. Slip candle sleeve (4) over each socket (5) - see Drawing 2.

4. Slip glass bobesche (6) over each candle sleeve (4).

5. Slip glass cup (7) over each candle sleeve (4).

6. Fixture can now be lamped accordingly.

If hanging the ﬁxture, please refer to hanging instruction sheet (I.S.19) provided and

refer back to section 5 to install ﬁxture crystals.

If mounting ﬁxture, slip canopy (D) over threaded tube (2) then thread hex nut (12)

onto threaded tube (2) and tighten to secure. Refer to next section (section 3) to

continuing mounting installation of this ﬁxture.

Drawing 1 - Fixture Assembly

Drawing 2 - Fixture Assembly

1. To install crystals, thread small crystal ball (8) onto threaded tube (9) and thread small

crystal ball (10) onto threaded tube (11) - see Drawing 2.

2. Hang crystals (13) from areas indicated.

12.29.08

120º

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Prepare mounting strap (B) for mounting by installing screws (A) into mounting

plate (B) - see Drawing 3.

• Be sure the holes into which the screws are threaded match the spacing of holes (C)

in the canopy (D) - see Drawings 3 and 4.

2. Attach mounting plate (B) to junction box (J), using screws (F) provided and slip

supply wires through large center hole.

1. Hang the ﬁxture by slipping canopy (D) over screws (A) and hold in position - see

Drawings 3 and 4.

2. Thread ball knobs (E) onto end of screws (A) and tighten to secure ﬁxture to ceiling.

Drawing 4 - Fixture Mounting

Drawing 3 - Strap Detail

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Résumé du contenu

Page 1 - Drawing 3 - Strap Detail

assembly instructionsFamily: Marcellina Item No. 4403 GR 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Ca

Page 2 - I.S.19 hanging instructions

start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire through chainDrawing 2 - Canopy

Page 3

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting MARCELLINA 4403GR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting MARCELLINA 4403GR. Hinkley Lighting MARCELLINA 4403GR User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting MARCELLINA 4403GR