Hinkley-lighting MARION 4478TB Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Marion Item No. 4478

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body of the ﬁxture, making all necessary electrical connections, hanging

the ﬁxture from the ceiling, and then installing the glass.

start here

4478

Note: Maximum wattage for 4478 ﬁxture is 60 watts per bulb.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 1 - Fixture Assembly

06.01.11

Drawing 1 - Arm Spacing

1. To install crystal pendant (2) hook onto small loop (C).

1. Rotate arms (A) until they are approximately 60 degrees apart - see Drawing 1.

Slip loop (1) along wire and thread onto tube (B) at top of center column

Please refer to hanging instruction sheet (I.S. 19) provided to hang this ﬁxture.

Then refer back to this sheet to install glass.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

assembly instructionsFamily: Marion Item No. 44781. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully

start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire through chainDrawing 2 - Canopy

Page 3

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Pas de commentaire

Hinkley-lighting MARION 4478TB Manuel d'utilisateur