Hinkley-lighting MONACO 4851BC Manuel d'utilisateur télécharger pdf

assembly instructions

Item No. 4851

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

start here

4851

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 1 - Installation

Drawing 2 - Assembly

01.01.13

1. To install shade (2), remove socket ring (3) from socket.

2. Slip mounting ring (R) of shade (2) over socket (1).

3. Thread socket ring (3) back onto socket (1) to secure shade.

4. To attached crystal (4), loop ring at top of crystal through eyelet.

***The construction of this ﬁxture will be accomplished by ﬁrst, installing

mounting hardware, making all necessary electrical connections, mounting

ﬁxture to the wall, and then installing the shade.

H I N K L E Y L I G H T I N G 330 0 0 Pin Oak P a rkway Avon Lake, O H 440 1 2 8 00.44 6 .5539 / 440 . 653.5 5 00 h inkle y light i ng.co m

1. Prepare mounting strap (A) by threading the two 1 1/4” long mounting screws (B)

into the back of the universal strap - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the back plate (E).

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

1. To mount ﬁxture, slip the two mounting screws (B) through the two mounting holes

(D) in the backplate (E) - see Drawing 1.

2. While holding ﬁxture in place, thread the two ball knobs (F) onto the end

of the mounting screws (B), and tighten.

1 2

Item No. 4851 1

Résumé du contenu

Page 1 - Item No. 4851

assembly instructions Item No. 48511. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully review instruction

Page 2

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Modèles reliés MONACO 4851BN

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting MONACO 4851BC Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting MONACO 4851BC. Hinkley Lighting MONACO 4851BC User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés MONACO 4851BN

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting MONACO 4851BC