Hinkley-lighting MORGAN 4870BR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting MORGAN 4870BR. Hinkley Lighting MORGAN 4870BR User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
assembly instructions
Family: Morgan Item No. 4870
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first mounting the
mounting strap to the junction box, making all necessary electrical connections,
mounting the fixture to the wall, and then installing the fixture glass.
start here
4870
1. Prepare mounting strap (A) by threading the two long mounting screws (B)
into the back of the mounting strap (A) - see Drawing 1.
Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the backplate (E).
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
5
Drawing 1 - Fixture Mounting
Drawing 2 - Shade Installation
B
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To mount fixture, slip the two mounting screws (B) through the two mounting holes
(D) in the backplate (E) - see Drawing 1.
2. While holding fixture in place, thread the two barrel knobs (F) on to the end
of the mounting screws (B), and tighten.
CA
J
06.01.13
3
2
1
4
5
1. To install shade first slip candle sleeve with harp (2) over socket (1) - see Drawing 2.
2. Fixture should be lamped accordingly at this time.
3. Align center hole in shade mount (S) with hole in the harp (H).
4. Thread stud (4) into hole in harp (H) approximately 1/4”.
5. Thread barrel knob (5) onto end of exposed stud (4) and tighten to secure shade.
HINKLEY LIGHTING 33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
H
S
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Drawing 1 - Fixture Mounting

assembly instructionsFamily: Morgan Item No. 48701. Find a clear area in which you can work.2. Unpack fixture and glass from carton.3. Carefully revi

Page 2

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Commentaires sur ces manuels

Pas de commentaire