Hinkley-lighting NEST FR52204ORB Manuel d'utilisateur télécharger pdf

FR52204ORB

ASSEMBLY INSTRUC T IONS

Assembly of this ﬁxture will be accomplished by ﬁrst installing the mounting strap to

the junction box

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 2

1 Remove ball knobs (c) from ﬁxture - See Drawing 2.

2 Remove retainer plate (a) from backplate (d).

3 Attach retainer plate (a) to junction box (j) using screws (b).

4 Additional screws (not provided) can be installed at points (e).

Make electrical connections from supply wire to ﬁxture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this ﬁxture.

6 Slip holes (g) in backplate (d) over screws (f) on retainer plate (a).

7 Thread ball knobs (c) onto screws (f) and tighten to secure backplate to wall.

[DRAWING 2]

Bulbs: 75 W MED. Replacemnt parts: GLASS: R52204GL-FRT, R52204GL-BOT, R52204GL-END

01.01.10

80 0.42 1 .3 5 17 W WW. F RE DR I C KR A MON D.C O M

NEST

, installing the glass, then mounting the ﬁxture to the wall.

STEP 1

[DRAWING 1 ]

The glass must be installed in a speciﬁc order. The ﬁrst panel to

install in the ﬁxture is the bottom panel (1) - See Drawing 1. It will be

necessary to navigate the panel passed the sockets. This can be

accomplished by slipping the back edge of the panel under the sockets

and then lowering the front edge of the glass down into positon.

Intall the tow side panels (2) next. Slip this down into position behind

the glass clips (3) located on the front upright (4) and backplate (5).

Now slip the front arched panel (6) behind the glass clips (3) located on the

front uprights.

Bend glass clips (3) against glass to hold panels in position.

FR52204ORBASSEMBLY INSTRUC T IONSAssembly of this ﬁxture will be accomplished by ﬁrst installing the mounting strap tothe junction boxSAFETY WARNING:

Pas de commentaire

Hinkley-lighting NEST FR52204ORB Manuel d'utilisateur