Hinkley-lighting QUATTRO FR49450BNI Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting QUATTRO FR49450BNI. Hinkley Lighting QUATTRO FR49450BNI User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
FR49450BNI
QUATTRO
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first installing the mounting strap to
the junction box, making all necessary electrical connections, mounting the fixture to
the wall and then attaching fixture shades.
SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1 Prepare mounting strap (a) by threading the two longest mounting screws (b)
into the back of the mounting strap (a), making sure the holes into which the
screws are threaded match the spacing of holes (d) in the backplate (e) - See
Drawing 1.
2 Attach mounting strap (a) to junction box (j) using two screws (c).
3 Make electrical connections from supply wire to fixture lead wires. Refer to
instruction sheet [FRIS18] and follow all instructions to make all necessary
wiring connections. Then refer back to this sheet to continue installation of
this fixture.
4 To mount fixture, slip the two mounting screws (b) through the two mounting
holes (d) in the backplate (e).
5 While holding fixture in place, thread the two ball knobs (f) onto the end of the
mounting screws (b), and tighten.
STEP 2
1 To install acrylic lens and shade, remove socket ring (1) from threaded socket (2)
- See Drawing 2.
2 Slip lens (3) over threaded socket (2).
3 Slip shade (4) over threaded socket (2). Making sure acrylic lens (3) seats
properly in the bottom of shade (4).
4 Thread socket ring (1) onto socket (2) and tighten to secure parts.
5 Fixture can now be lamped accordingly.
[DRAWING 1]
[DRAWING 2]
j
Bulbs:75W MEDIUM Replacement Parts: SHADE: R49450SH DIFFUSER: R49450df
b
a c e
d
f
1.22.09
800.421.3517 WWW.FREDRICKRAMOND.COM
1
4
2
3
Vue de la page 0
1

Résumé du contenu

Page 1 - ASSEMBLY INSTRUCTIONS

FR49450BNIQUATTRO ASSEMBLY INSTRUCTIONS Assembly of this fixture will be accomplished by first installing the mounting strap to the junction box,

Commentaires sur ces manuels

Pas de commentaire