Hinkley-lighting SIERRA 1452 Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Sierra Item No. 1452

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

ﬁxture, installing the mounting strap, making all necessary wiring connections,

and then hanging the ﬁxture.

start here

1452

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 1452 ﬁxture is 75 watts per bulb.

10.22.10

Drawing 1 - Glass Replacement

1. To lamp ﬁxture insert bulb through the open bottom and thread into socket.

2. To replace a glass panel (1), bend glass clip (2) away from the glass - see Drawing 1.

3. Remove broken piece of glass and insert new piece.

4. Complete glass replacement by bending the glass clips (2) back into position.

5. Fixture can now in installed, please refer to hanging instruction sheet (IS 19).

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

assembly instructionsFamily: Sierra Item No. 1452 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully

start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire through chainDrawing 2 - Canopy Adj

Page 3

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Pas de commentaire

Hinkley-lighting SIERRA 1452 Manuel d'utilisateur