Hinkley-lighting SLOAN 4543RB Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Sloan Item No. 4543 RB

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body of the ﬁxture, attaching the mounting strap to the junction box,

making all necessary electrical connections, hanging the ﬁxture from the

ceiling, and then installing the glass lens.

start here

4543

Drawing 1 - Fixture Assembly

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

1. Before installing glass, ﬁxture can now be lamped accordingly.

2. To install glass, slip center hole of glass (7) onto center tube (1), up against rubber

washer (6) and hold in position - see Drawing 1.

3. Slip rubber washer (8) and ﬂat washer (9) onto center tube (1), up against glass (7),

and hold in position.

4. Thread hex nut (10) onto center tube (1) and tighten to secure glass (7).

5. Slip cap (11) and thread cap knob (12) onto end of center stem (1) and tighten.

Next thread center tube (1) into coupler (2) approximately 3/8”.

Drawing 1

3. Slip sleeve (3), spacer (4), ﬂat washer (5) and rubber washer (6) over center tube (1).

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

10.26.10

Drawing 3 - Fixture Mounting

Drawing 2 - Strap Detail

1. Prepare mounting strap (B) for mounting by installing screws (A) into mounting

plate (B) - see Drawing 2.

• Be sure the holes into which the screws are threaded match the spacing of holes (C)

in the canopy (1) - see Drawings 2 and 3.

2. Attach mounting plate (B) to junction box (J), using screws (G) provided and slip

supply wires through large center hole.

1. Hang the ﬁxture by slipping canopy (D) over screws (A) and hold in position - see

Drawings 2 and 3.

2. Thread ball knobs (E) onto end of screws (B) and tighten to secure ﬁxture to ceiling.

First slip center column (CC) along wire and thread onto stem (S) - see

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

Résumé du contenu

Page 1 - Drawing 2 - Strap Detail

assembly instructionsFamily: Sloan Item No. 4543 RB 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefull

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting SLOAN 4543RB Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting SLOAN 4543RB. Hinkley Lighting SLOAN 4543RB User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting SLOAN 4543RB