Hinkley-lighting SPECTRA FR37554PTR Manuel d'utilisateur télécharger pdf

fR37554

SPECTRA

A S S EMBLY I N S T RUC T IONS

Assembly of this ﬁxture will be accomplished by ﬁrst determining the length of stem

required, attaching the mounting strap to the junction box, making all necessary

electrical connections, and hanging the ﬁxture from the ceiling.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

S T E P 1

1 Determine the overall length you will need the assembled ﬁxture to be.

2 Determine what stems will be needed to achieve the overall length you

require.(Additional stems are available and can be ordered. Ask your local

Fredrick Ramond representative or visit www.fredrickramond.com for

information.

3 Install ﬁrst stem (a) by slipping it along the supply wire of the ﬁxture, and

threading it into decorative coupler (b) of cage assembly (c) - see Drawing 1.

[DRAWING 1]

Bulbs: 100W MED.

01.01.13

Continue adding stems (a) until determined length is acheived.

Fixture is ready for installation. Follow instruction sheet [FRIS19-91] provided.

After installation ﬁxture can be lamped accordingly and glass installed.

To install glass, thread one of the decorative knobs (3) onto one end of center

tube (4) and slip plastic washer (3a) onto center tube (4).

Slip bottom piece of glass (5) into bottom of cage (c), slip center tube (4) through

center hole of bottom glass (5), lift glass into center ring (r), making sure glass seats

inside ring, and hold parts in postion. Note: both pieces of glass are the same.

Slip top glass (5) into top of cage assembly (c), and slip center hole of glass onto

center tube (4) and down onto center ring (r) making sure seats inside ring.

Slip second plastic washer (6a) onto center tube (4) and thread decorative knob

(6) onto end of center tube to secure glass pieces (5).

Fixture is complete and power can be restored.

supply

wire

1 2 3

Résumé du contenu

Page 1 - S T E P 1

fR37554SPECTRAA S S EMBLY I N S T RUC T IONS Assembly of this ﬁxture will be accomplished by ﬁrst determining the length of stem required, attac

Page 2 - 1 WIRING INSTRUCTIONS

WIRING AND GROUNDING INSTRUCTIONS SAFETY WARNING: Read wiring and grounding instructions [FRIS 18] and any additional directions. Turn power supply

Page 3 - FRIS19-91

FRIS19-91SAFETY WARNING: Read wiring and grounding instructions [FRIS 18] and any additional directions. Turn power supply oﬀ during installation. If

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting SPECTRA FR37554PTR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting SPECTRA FR37554PTR. Hinkley Lighting SPECTRA FR37554PTR User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting SPECTRA FR37554PTR