Hinkley-lighting SPLENDOR 4924BN Manuel d'utilisateur télécharger pdf

assembly instructions

Item No. 4924

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the main

body of the ﬁxture, making all necessary electrical connections, hanging the ﬁxture

from the ceiling and then installing the ﬁxture shade.

start here

4924

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: It will be necessary to determine the length of rods you will require to hang your

ﬁxture at the desired height. After this has been established, please follow the

instructions below.

Drawing 1 - Assembly

Drawing 2 - Assembly

1.1.13

2. Slip next section of stem (A) along wire and thread into top of previously installed

stem .

3. Continue adding sections of stem (B) until all necessary length have been attached to

the ﬁxture.

4. Fixture can now be mounted to the ceiling by following mounting instruction sheet

(IS19-82) provided.

1. Slip 18” stem (1) along wire and thread onto top of body (2) and tighten- see

Drawing 1.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 8 0 0 . 4 4 6 . 5 5 3 9 / 4 4 0 .653.5500 hinkleylighting.com

5. After ﬁxture is mounted to ceiling, slip cap (3) over threaded tube (C) at bottom of

ﬁxture. Hold in place and thread decorative ball (4) onto threaded tube (C) and

tighten - see Drawing 1.

1. To complete assembly slip glass bobesche (6) over socket (5) - see Drawing 2.

2. .Fixture can be lamped accordingly at this point, and power can be restored.

1 2 3

Résumé du contenu

Page 1 - Item No. 4924

assembly instructions Item No. 49241. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully review instructions

Page 2 - I.S. 19-82

1. Shut off electrical current before starting. If the ﬁxture you are replacing is turned on and off by a wall switch, simply turn the switch off. If

Page 3

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting SPLENDOR 4924BN Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting SPLENDOR 4924BN. Hinkley Lighting SPLENDOR 4924BN User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting SPLENDOR 4924BN