Hinkley-lighting THISTLEDOWN 4508VZ Manuel d'utilisateur télécharger pdf

HINK L E Y LIGHTING

33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 www.hinkleylighting.com

assembly instructions

Family: Thistledown Item No. 4508 VZ

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. To assemble ﬁxture, attach the stems (2) to the swivels (A), located on main ring

assembly (1) by threading them together.

2. Slip top end of each stem (2) through one of the large holes (B) in seecondary canopy

(3). Starting at one hole then going clockwise around the secondary canopy.

3. On the top of each stem (2) thread on the half ball knob (4).

4. At this point you must determine if the ﬁxture is to be chain hung or mounted to the

ceiling. Please see instructions below for each option.

Chain Hung Option

1. Thread supply wire through the side of coupler (C) and out through the top

threaded hole.

2. Slip loop and plate assembly (5) along supply wire and thread into coupler (C) and

tighten.

3. Please refer to the hanging instruction sheet (I.S. 19) provided to hang ﬁxture. Then

refer back to this sheet to install glass.

Ceiling Mount

1. Please refer to the hanging instruction sheet (I.S. 17) provided to hang ﬁxture. Then

refer back to this sheet to install glass.

1. To install glass, remove socket ring (8) from socket (D).

2. Slip glass (7) over socket (D) and replace socket ring (8).

3. Repeat steps 1-2 for remaining glass.

4. Fixture can now be lamped accordingly

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

ﬁxture, determining what mounting style you will use, making all necessary

electrical connections, installing the approriate hardware to the junction box,

and then hanging the ﬁxture from the ceiling.

start here

4508

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 4508 ﬁxture is 100 watts per bulb.

Drawing 1 - Glass Installation

2.7.08

1 2 3

Résumé du contenu

Page 1 - HINK L E Y LIGHTING

HINK L E Y LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 www.hinkleylighting.comassembly instructionsFamily: Thistledo

Page 2 - I.S.19 hanging instructions

start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire through chainDrawing 2 - Canopy Adj

Page 3

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting THISTLEDOWN 4508VZ Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting THISTLEDOWN 4508VZ. Hinkley Lighting THISTLEDOWN 4508VZ User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting THISTLEDOWN 4508VZ