Hinkley-lighting BARCELONA FR44100SLF Manuel d'utilisateur télécharger pdf

FR44100

BARCELONA

ASSEMBLY I N S T RUCTION S

Assembly of this ﬁxture will be accomplished by ﬁrst spreading the arms to their

proper position, assembling the main body parts, hanging the ﬁxture, installing

the glass, attaching diﬀuser and then hanging the crystals.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 1

1 Take the main ﬁxture assembly and spread the arms (a) until they are

approximately 60° apart - See Drawing 1.

STEP 2 Refer to Hanging Instruction Sheet [FRIS19-50R ] to hang ﬁxture. Then refer

back to this sheet to continue installation of this ﬁxture.

STEP 3

1 Remove threaded socket ring (1) from socket (c) - See Drawing 2.

2 Slip small alabaster bowl (2) over socket (c).

3 Thread socket ring (1) onto socket (c) to secure glass (2).

· The large natural alabaster bowls used on the Barcelona series can be scratched

during installation if care is not taken. To prevent scratching of the alabaster,

we suggest the following procedure.

4 Prior to inserting large bowl (3), take small hand towels and lay them over each of

the arms - See Drawing 3.

5 Tilt alabaster bowl up and slip lip of glass under uprights, being careful not to

damage the wires and quick connect (5) located in the bottom center of the

ﬁxture.

Note: Make sure quick connect is passed through the center hole (d) of the

alabaster bowl (3) and the center hole also slips over the center pipe (e).

6 Plug quick connector (4) and (5) together.

Note: the connector is designed to ﬁt only one way.

7 Fixture can now be lamped accordingly.

S T E P 4

1 Remove the ball knob screws (6) located above the socket assembly (f)- See

Drawing 2.

2 Talk half of the perforated diﬀuser (7) and attach it above socket assembly (f)

using the ball knob screws (6) removed earlier.

3 Repeat steps 1-2 for opposite half of perforated diﬀuser (7), making sure the tabs

are engaged on the opposite diﬀuser half.

STEP 5 Refer to Crystal Installation Sheet provided to install crystals.

[DRAWING 1]

[DRAWING 2]

60°

Bulbs: 60W CAND. & 75W MED.

[DRAWING 3]

09.12.08

1 2 3 4

Résumé du contenu

Page 1 - Drawing 2

FR44100BARCELONA ASSEMBLY I N S T RUCTION S Assembly of this ﬁxture will be accomplished by ﬁrst spreading the arms to their proper position,

Page 2 - BARCELONA

FR44100FRMBARCELONABulbs: 60W CAND. & 75W MED. CRYSTAL INSTALLATION INSTRUCTIONSThis Barcelona chandelier

Page 3 - S T E P 3

HANGING INSTRUCTIONS FOR FIXTURES THAT WEIGHT MORE THAN 50LBSFRIS19-50R SAFETY WARNING: Read wiring and grounding instruct

Page 4 - [drawing 3]

WIRING AND GROUNDING INSTRUCTIONS SAFETY WARNING: Read wiring and grounding instructions [FRIS 18] and any additional directions. Turn power supply

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting BARCELONA FR44100SLF Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting BARCELONA FR44100SLF. Hinkley Lighting BARCELONA FR44100SLF User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting BARCELONA FR44100SLF