Hinkley-lighting CAMBRIDGE 4412 Manuel d'utilisateur télécharger pdf



assembly instructions

Family: Cambrodge Item No. 4410 / 4412

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

mounting the ﬁxture to the wall and then installing the ﬁxture glass.

start here

4412



Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

Drawing 1 - Fixture Mounting

Drawing 2 - Glass Installation

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. To mount ﬁxture, slip the two mounting screws (B) through the two mounting holes

(D) in the backplate (E) - see Drawing 1.

2. While holding ﬁxture in place, thread the two ball knobs (F) on to the end

of the mounting screws (B), and tighten.

1. Prepare mounting strap (A) by threading the two 7/8” long mounting screws (B)

into the back of the universal strap - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the back plate (E).

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided.

7.27.09

1. Slip candle sleeve (2) over socket (1).

2. Slip candle chaser (3) over candle sleeve (2).

3. Fixture can now be lamped accordingly.

4410

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

Drawing 1 - Fixture Mounting 1

Résumé du contenu

Page 1 - Drawing 1 - Fixture Mounting

assembly instructionsFamily: Cambrodge Item No. 4410 / 4412 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3.

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting CAMBRIDGE 4412 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting CAMBRIDGE 4412. Hinkley Lighting CAMBRIDGE 4412 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting CAMBRIDGE 4412