Hinkley-lighting DAPHNE 5925 Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Daphne Item No. 5925

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. Prior to installing glass, ﬁxture can now be lamped accordingly. Note: During the

installation of the bulbs, do not touch the glass portion with your ﬁngers. Gloves are

recommended.

2. Clip glass bulb shields (2) onto socket (1) - see Drawing 2.

3. Attach bottom glass shield (3) using square screw (4).

4. Attach glass (5) using square screws (6).

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting the retainer plate to the junction box, making all necessary electrical

connections, mounting the backplate to the retainer plate and then installing the

ﬁxture glass.

start here

5925

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

Drawing 1 - Fixture Mounting

Drawing 2 - Glass Installation

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

6.18.08

1. Release mounting strap (A) by removing the 2 ball knobs (C) on the front of the

ﬁxture’s backplate (D) - see Drawing 1.

2. Remove retainer plate (A) from backplate (D).

3. Attach retainer plate (A) to junction box using two 8-32 screws (B).

4. Additional screws can be installed at points (E) for additional mounting support.

Please use apropriate anchor for material the ﬁxture is being mounted to.

1. To mount ﬁxture, slip holes (G) in backplate (D) over screws (F) on retainer plate (A)

- see Drawing 1.

2. While holding ﬁxture in place, thread the two ball knobs (C) onto the end of screws

(F), and tighten to secure backplate to the wall.

HINKLEY LIGHTING 33000 Pin Oak Parkway, Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

Drawing 1 - Fixture Mounting 1

Résumé du contenu

Page 1 - Drawing 1 - Fixture Mounting

assembly instructionsFamily: Daphne Item No. 59251. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully

Page 2

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting DAPHNE 5925 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting DAPHNE 5925. Hinkley Lighting DAPHNE 5925 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting DAPHNE 5925