Hinkley-lighting HAMLET FR42861VBZ Manuel d'utilisateur télécharger pdf

FR42861

HAMLET

A S S EMBLY IN S T RU C T ION S

Assembly of this ﬁxture will be accomplished by ﬁrst attaching the mounting hardware

to the junctin box, making all necessary electrical connections, mounting the ﬁxture to

the ceiling and then attaching the rope and crystal accents.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 1

1 Prepare mounting strap (a) by threading the two long mounting screws (b)

into the back of the mounting strap (a), making sure the holes into which the

screws are threaded match the spacing of holes (d) in the canopy (e) - See

Drawing 1.

2 Attach mounting strap (a) to junction box (j) using two screws (c).

3 Make electrical connections from supply wire to ﬁxture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this ﬁxture.

4 To mount ﬁxture, slip the two mounting screws (b) through the two mounting

holes (d) in the canopy (e).

5 While holding ﬁxture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

STEP 2

1 Prior to installing rope and crystal accents, ﬁxture can now be lamped accord-

ingly.

2 Thread center tube (2) into coupler (1) approximately 3/8” - see Drawing 2.

3 Slip tube (3) over center stem (2) and hold in position.

4 Slip small tube cap (4) onto center tube (2) followed by large cap, with side

holes, (5).

5 Thread knurled nut (6) onto end of center tube (2) and tighten to secure parts.

7 Thread ﬁnial (7) onto end of center tube (2) and tighten.

8 Refer to Accent installation instructions to complete ﬁxture.

[DRAWING 1]

[DRAWING 2]

Bulbs: 60W canD. Replacement Parts: crystals: R42861CRYSTR ROPE: R42861ROPE

06.01.13

1 2 3

STEP 1 1
STEP 2 1
2

Résumé du contenu

Page 1 - STEP 2

FR42861HAMLET A S S EMBLY IN S T RU C T ION S Assembly of this ﬁxture will be accomplished by ﬁrst attaching the mounting hardware to the junct

Page 2 -

FR42861HAMLET[DRAWING 1]CRYSTAL AND ROPE ACCENT INSTALLATION INSTRUCTIONS. 01.01.13TOP VIEW S T EP 11 Unpack all the crystal (8)

Page 3

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting HAMLET FR42861VBZ Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting HAMLET FR42861VBZ. Hinkley Lighting HAMLET FR42861VBZ User Manual [en] [de] [fr] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting HAMLET FR42861VBZ