Hinkley-lighting KEY WEST 1615RB Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting KEY WEST 1615RB. Hinkley Lighting KEY WEST 1615RB User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
assembly instructions
Family: Key West Item No. 1615
1. Find a clear area in which you can work.
2. Unpack xture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Prepare mounting strap (A) by threading the two 8-32 long mounting screws (B)
into the back of the gull wing bracket - see Drawing 1.
• Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the back plate (E) - see Drawings 1 and 2.
2. Attach mounting strap (A) to junction box (J) using two 8-32 screws (C) 1” long (not provided) -
see Drawing 2.
1. To mount xture to the wall, slip the two mounting screws (B) through the two mounting holes
in the backplate (E) - see Drawing 2.
2. While holding xture in place, thread the two ball knobs (F) onto mounting screw (B) and
tighten.
1. Fixture can now be lamped accordingly.
4. To complete assembly of this xture, Line up studs (2) on the cage with the holes (3) located in the
roof assembly (1).
5. Thread ball knob (4) onto the stud (2) to secure cage (5) to roof asssembly (1).
*** The construction of this xture will be accomplished by rst making all necessary electrical
connections, mounting the mounting strap to the junction box, mounting the xture to the
wall, and then assembling the main body of the xture.
start here
1615
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 1 - Strap Detail
Drawing 2 - Fixture Mounting
B
(side view)
gull wing
bracket
backplate
B
Drawing 3 - Fixture Assembly
Make electrical connections from supply wire to xture lead wires. Refer to instruction sheet (I.S.
18) and follow all instructions to make all necessary wiring connections. Then refer back to this
sheet to continue installation of this xture.
5
01.03.12
2
1
4
3
4
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - Drawing 3 - Fixture Assembly

assembly instructionsFamily: Key West Item No. 16151. Find a clear area in which you can work.2. Unpack xture and glass from carton.3. Caref

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Page 3 - Drawing 1

I.S.200 Caulking Instruction____start here---Drawing

Commentaires sur ces manuels

Pas de commentaire