Hinkley-lighting LAUREN 4065VZ Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Lauren Item No. 4065

1. Find a clear area in which you can work.

2. Unpack xture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this xture will be accomplished by rst assembling the main body

of the xture, making all necessary electrical connections, hanging the xture from the

ceiling, and then installing the glass.

start here

4065

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 2 - Fixture Assembly

01.01.12

Drawing 1 - Arm Spacing

1. Rotate arms (A) until they are approximately 72 degrees apart - see Drawing 1.

2. Slip loop (1) along wire and thread onto tube (B) at top of center column (2).

3. Slip candle sleeve (3) over socket (S).

3. Please refer to hanging instruction sheet (I.S. 19) provided to hang this xture.

Then refer back to this sheet to install glass.

1. Fixture can be lamped accordingly prior to installing the glass

2. To install glass (4) slip glass through ring and make sure base of glass seats

properly in glass holder (GH).

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

assembly instructionsFamily: Lauren Item No. 4065 1. Find a clear area in which you can work.2. Unpack xture and glass from carton.3. Carefull

start hereDrawing 1 - Hanging AssemblyI.S.19 hanging instructionsI.S. 1912A4B5C6weave supply wire andground wire through chainDrawing 2 - Canopy

Page 3

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Pas de commentaire

Hinkley-lighting LAUREN 4065VZ Manuel d'utilisateur