Hinkley-lighting MARGEAUX 3587VS Manuel d'utilisateur télécharger pdf

assembly instructions

Item No. 3587

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

sta rt he re

3587

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body, hanging the ﬁxture, and then installing the ﬁxture glass.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INS TALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

6.1.12

Drawing 1 - Fixtu re Assembly

1. To install glass, remove socket ring (3), spacer (4) from socket (2).

2. Slip glass (4) over socket (2) and hold in postion.

3. Slip spacer (4) over socket and thread on socket ring using socket ring tool provided.

4. Fixture can now be lamped accordingly.

1. It will be necessary to determine the total lenght of rods (R) you will require to

hang your ﬁxture at the desired height. Fixture is supplied with 1 - 6” and 2 - 12” rods.

2. After determining the rod lenghts needed, slip the ﬁrst rod along the wire and

thread into coupler (1). Continue to add rods as needed.

3. To ﬁnish installation of ﬁxture please refer to instruction sheet (I.S. 19-81)

provided. Then refer back to this sheet to install glass.

REQUIRED

LENGTHS

socket

ring

tool

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, Ohio 44012 800-446-5539 www.hinkleylighting.com

1 2

assembly instructions Item No. 35871. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully review instructions

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Modèles reliés MARGEAUX 3587PN

Pas de commentaire