Hinkley-lighting MASON 5690TB Manuel d'utilisateur télécharger pdf

assembly instructions

Family: Mason Item No. 5690

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

assembling the main body of the ﬁxture, mounting the ﬁxture to the wall,

and then installing the glass.

start here

5690

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 2 - Fixture Assembly

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

1. Remove main mounting plate (A) from ﬁxture back plate (B) by removing the four

ﬂat head screws (C) - see Drawing 1.

2. Slide the wires from the junction box, through the large center hole, making sure

curved slots (D) line up with the threaded holes (E) in the junction box.

3. Using two 8-32 screws (F) attach the main mounting plate (A) to the junction box,

making sure side of mounting plate (A) is square to ceiling.

1. Mount the ﬁxture by sliding the back plate (B) over mounting plate (A) - see

Drawing 1.

2. Attach the back plate (B) to the mounting plate (A) using the screws (C).

6.1.11

Drawing 1 - Fixture Mounting

1. To install glass remove socket ring (2) and spacer (3) from socket (1).

2. Slip hole in back of glass (4) over socket (1) followed by spacer (3).

3. Thread socket ring (2) onto socket (1) and tight to secure glass (4) making sure

glass is level.

4. Fixture can now be lamped accordingly. After lamping make sure to clip bulb shield

(7) onto the bottom of the socket (1) and then use one ﬁnger push the raised point of

the second metal clip (7-1), and then spread the onside of the clip outward so it would

ﬁt over the bottom clip, then slide the clip on and over the bottom clip.

5. Decorative grill (5) tabs can be slip over crossbar (6) and centered. Fixture is

complete. Note: there are locator tabs on the back of crossbar (6) to help locate gril in

the center of the crossbar.

buld shield detail drawing

bottom shield

top shield

7-1

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

Drawing 1 - Fixture Mounting 1

Résumé du contenu

Page 1 - Drawing 1 - Fixture Mounting

assembly instructionsFamily: Mason Item No. 5690 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Car

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Commentaires sur ces manuels

Pas de commentaire

Hinkley-lighting MASON 5690TB Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting MASON 5690TB. Hinkley Lighting MASON 5690TB User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Hinkley-lighting MASON 5690TB