Hinkley-lighting SOPHIE 54680 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Hinkley-lighting SOPHIE 54680. Hinkley Lighting SOPHIE 54680 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 www.hinkleylighting.com
assembly instructions
Item No. 54680
1. Find a clear area in which you can work.
2. Unpack xture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Remove mounting plate (1) from xture backplate (5) by removing the 4 athead screws (4) - see
Drawing 1.
2. Take main mounting plate (1) and slide the wires from the junction box through the large center
hole. Line up the curved slots (3) with the threaded holes in the junction box. Using 2 screws (2)
attach the main mounting plate to the junction box.
• Make sure mounting plate tabs are 90 degrees to the ceiling line - see Drawing 2.
1. Mount the xture by sliding the backplate (5) over the mounting plate (1) - see
Drawing 1.
2. Attach the backplate (5) to the xture using the screws (4) that were removed prior.
*** The construction of this xture will be accomplished by rst mounting the
mounting strap to the junction box, making all necessary electrical connections,
mounting the xture to the wall, and then installing the xture glass.
start here
54680
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Make electrical connections from supply wire to xture lead wires. Refer to instruction sheet (I.S.
18) and follow all instructions to make all necessary wiring connections. Then refer back to this
sheet to continue installation of this xture.
5
Drawing 1 - Fixture Mounting
Drawing 2 - Mounting Plate
Drawing 3 - Glass Installation
ceiling line
90°
6.1.12
xture
plate
1
2
22
23
4
5
4
3
2
4
1
5
1. To attach glass rst remove spacer (2) and socket ring (3) from socket (1).
2. Slip glass (4) over socket (1).
3. Slip spacer (2) over socket (1) and thread on socket ring (3) to secure glass (4).
4. Lamp xture accordingly and then thread on bulb (5) over bulb.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Item No. 54680

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 www.hinkleylighting.comassembly instructionsItem No. 546801. Fi

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Commentaires sur ces manuels

Pas de commentaire