Hinkley-lighting SURF 2350 Manuel d'utilisateur télécharger pdf

- 1 -

____Assembly Instructions____

Item No. 2350

start here---

1. Find a clear area in which you can work.

2. Unpack Fixture and glass from carton.

3. Carefully Review Instructions Prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the

main body of the ﬁxture, attaching the mounting strap to the junction box,

making all necessary electrical connections, hanging the ﬁxture from the wall.

1. Remove main mounting plate (A) from ﬁxture back plate (B) by removing the 2

ﬂat head screws (C) - see Drawing 1.

2. Slide the wires from the junction box, through the large center hole, making

sure curved slots (D) line up with the threaded holes (E) in the junction box.

3. Using two 8-32 screws (F) attach the main mounting plate (A) to the junction

box, making sure the top of mounting plate (A) is parallel to ceiling.

SAFETY WARNING: READ WIRING AND GROUNDING

INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS.

TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW

WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR

LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 1 – Mounting Detail

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

- 1 -____Assembly Instructions____Item No. 2350start here--- 1. Find a clear area in which you can work.2. Unpack Fixture and glass from carton

Page 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

I.S.200 Caulking Instruction____start here---Drawing

Pas de commentaire

Hinkley-lighting SURF 2350 Manuel d'utilisateur